Hi, hope all is well. One incredibly frustrating yet seemingly easy fix is allowing the square register customer screen(and I mean the image in the screen not the physical screen itself) to be rotated 180 degrees. It already does it when the screen is plugged directly into the register! However when you remove the display and connect it with the cable, it flips the image 180 degrees. This is because Square expects you to lay the customer screen on the counter in a certain orientation because of the Chip reader protruding from the back. Unfortunately that means the customer has to place the card in in the most unintuitive manner into the reader. 99% of the time the customer has to hold up the line trying to figure out that the card needs to be inserted the other way. Please allow the image to be rotated 180 degrees, I have created a stand that will allow me to flip the display 180 degrees so that inserting the card is more intuitive, now I just need the image to flip so that the text is upright. It already does so when plugged in!! Make it an option in settings, I beg! And in the future I advise making your card reader work regardless of which direction it’s inserted!
